Rear suspension bottoming out or bouncing on a Honda CB750 Hornet 2026
Is your Honda CB750 Hornet 2026 showing "Rear suspension bottoming out or bouncing"? Here's the most likely cause, the checks to run, and the parts that fit your bike.
Technical bulletin
Honda CB750 Hornet 2026 — owner breakdown
The Honda CB750 Hornet 2026 is a Japanese-built machine. Checks below are ordered for this bike.
- Newest model year
- 2026
Catalog data and community feedback — indicative markers, not a workshop manual.
Most likely cause
BasicPreload / rebound wrongly set
The first, free reflex: set the spring preload (and rebound if present) to your load. Too little preload bottoms out and sags the bike; too much makes it hard and skittish. Aim for the recommended static sag (about a third of the travel). 🟢 Simple adjustment with the original tool. This tool helps you understand what's going on -- it doesn't replace a certified mechanic.
How to make the repair yourself
🟢 Within reach of any rider: no advanced mechanical skill or specialised tooling needed.
- Locate the preload adjustment: a stepped collar on the spring (a C-spanner or supplied tool) or a hydraulic knob on recent models.
- Measure the sag: unladen height (bike on a rear stand), then bike on its wheels with you in riding gear and position; the sag should be about 30-33% of the travel.
- Increase the preload if the bike sits too low / bottoms out; decrease it if it stays high and harsh.
- Adjust for the load: more preload two-up or loaded, less solo. Note your settings.
- If present, set the rebound: the bike should return without bouncing or staying packed down after a bump.
⚠️ This tool helps you understand what's going on with your motorcycle; it doesn't replace the inspection or judgment of a certified mechanic. If in persistent doubt, if a safety-critical part is involved (braking, steering, bearings, transmission), or if the problem keeps recurring, have the diagnosis confirmed at a workshop before doing any work.